LG Ericsson Data Networking LGD-ES-2026P 24 port Smart Switch 2 gig and POE

- 802.1d : Spanning tree protocol (STP) 802.1w : ~~~rapid spanning tree protocol (RSTP)
- Max number of groups 12
- Max number of members per group 8
- Source & destination MAC based load balance
- 4 096 VLAN IDs
- Max number of active VLANs per switch 128
- Port based VLAN
- Link Layer Discovery Protocol (802.1ab)
- Snoop IGMP packets per VLAN
- Max Number of multicast groups 128
- IGMP Snooping V1 2 Querier
- QoS on L3 using TOS field of IP packet header
- DSCP to 802.1p mapping
- QoS on L2 layer using TCI field of VLAN header
- Strict Priority Queuing
- Weighted Round Robin Queuing
- Voice VLAN / Auto QoS
- L2/L3/L4 based ACL (Max 512 ACL)
- Full/Half Duplex flow control Back pressure for half duplex
- Port rate limiting shaping all traffic by bps
- Broadcast - packet rate control
- Multicast - packet rate control
- RADIUS / TACACS+ authentication and accounting
- Port based authentication
- MAC limitation per port
- MAC based port security (static/dynamic)
- HTTP HTTPS
- SNMP v1/v2c/v3 Trap (RFC 1215)
- TCP/IP-based internets (RFC1213)
- RMON v1/2 (RFC2819/RFC4502)
- Received traffic
- Transmit traffic
- Received and transmit traffic
- N to 1 Mirror
- SNTP Network time
- Configuration backup / restore
- Firmware backup / upgrade
- IP Clustering up to 36 switches
- 8.8 Gbps switching fabric capacity
- 6.6 Mpps
- 16M flash memory
- 128M DRAM
- 8K MAC address capacity
- 10K MTU/ Jumbo frames support
- Auto-negotiation auto-MDI/MDIX
- 150 000 MTBF
- Reset button
- 10/100Base-TX Service ports
- 24 10/100Base-T Ports per Unit
- 2 pair combo RJ45/SFP
- POE Support on all ports based on 802.3af
- POE+ support based on 802.3at port 1-6
- POE Power Indication and safety
- Auto disable on the excess of total power
- Dynamic Power Allocation
- 185 Watt POE Power Budge
- 19” Rack Mount

LGDES2026P